Headset Junction Box | Broadcast Systems and Equipment Inc

BSE Manufacturing's Headset Junction Box extends any mercury port to a headset. There are three Headset Junction Box models:

View the Headset Junction Box diagrams: GPI Concentrator Cable and HJB Breakout Cable.

HJB-X-0100

Headset Junction Box HJB-0100

Direct interface to 2 Mercury Ports from a single CAT5 connector
Speak destinations, listen sources and headset volume controllable by Mercury Virtual Panel
PTT control via Mercury GPIO connection
XLR connectors for Headsets and LEMO for PTT
Designed for on or under desk installation
Electrec or Dynamic microphone input
Microphone AGC, compression and limiting for consistent output level
2 Watt output can drive headsets up to 600 Ohms

Dimensions (inches)
- 4.25W X 1.25H X 6.5D
Power
- Supplied 24 Volt DC 2.6 A Adapter
Connectors
- To the Trilogy B2B
  - 1x RJ45
  - Provides 2 listen, 1 Speak and GPI
- To the power adapter
  - Captive 2.1 x 5.5mm DC Jac
- To the headsets
  - HJB-L-0200 (2X) 12 pin Lemo
- To the Foot Pedal
  - HJB-L-0200 (2X) 4 pin
Audio
- From Black Box 2
  - (2x) 0 dBu Balanced (RJ45)
- To Black Box 2
  - 0 dBu Balanced (RJ45)
- Headset Microphone
  - Electrec
- Headset Speakers
  - 2 Watt Headphone driver
Accessories
- HJB-B2R2
  - This cable provides the necessary breakout of the single CAT5 from the HJB-L-0200 to the three connectors required at the Mercury Interface Unit.
- HJB-G2R1
  - When two HJB-L-0200 units are connected to one Mercury Interface Unit this cable combines the two GPI connectors from the HJB-B2R2 cables to the single GPI connector on the MIU.
- PTT-0100 or PTT-0200
  - These units can provide headset extension and PTT switches for the HJB-L-0200

Headset Junction Box HJB-0200

Direct interface to 2 Mercury Ports from a single CAT5 connector
Speak destinations, listen sources and headset volume controllable by Mercury Virtual Panel
PTT control via Mercury GPIO connection
Provides 2 headset ports (Operator and Student)
Provides 2 foot pedal ports (Operator and Student)
LEMO connectors for Headsets and PTT
Designed for on or under desk installation
Electret microphone input
Microphone AGC, compression and limiting for consistent output level
2 Watt output can drive headsets up to 600 Ohms
Can supply DC power to active headsets

Dimensions (inches)
- 4.25W X 1.25H X 5D
Power
- Supplied 24 Volt DC 2.6 A Adapter
Connectors
- To the Trilogy B2B
  - 1x RJ45
  - Provides 2 listen, 1 Speak and GPI
- To the power adapter
  - Captive 2.1 x 5.5mm DC Jac
- To the headsets
  - HJB-P-0100 7 pin XLR Jack
  - HJB-C-0100 Dual 3.5mm Jack
- To the Foot Pedal
  - HJB-P-0200 ¼ inch Jack
  - HJB-C-0100 3.5mm Jack
Audio
- From Black Box 2
  - (2x) 0 dBu Balanced (RJ45)
- To Black Box 2
  - 0 dBu Balanced (RJ45)
- Headset Microphone
  - Electrec or Dynamic
- Headset Speakers
  - 2 Watt Headphone driver
Accessories
- HJB-B2R2
  - This cable provides the necessary breakout of the single CAT5 from the HJBX-0100 to the three connectors required at the Mercury Interface Unit.
- HJB-G2R1
  - When two HJB-P-0200 units are connected to one Mercury Interface Unit this cable combines the two GPI connectors from the HJB-B2R2 cables to the single GPI connector on the MIU.
- PTT-0301 or PTT-0401
  - These units can provide headset extension and PTT switches for the HJB-X-0100 HJB-C-0100 Panel

Headset Junction Box HJB-L-0200

Direct interface to 2 Mercury Ports from a single CAT5 connector
Speak destinations, listen sources and headset volume controllable by Mercury Virtual Panel
PTT control via Mercury GPIO connection
Provides 2 headset ports (Operator and Student)
Provides 2 foot pedal ports (Operator and Student)
XLR connectors for Headsets and LEMO for PTT
Designed for on or under desk installation
Electrec microphone input
Microphone AGC, compression and limiting for consistent output level
2 Watt output can drive headsets up to 600 Ohms

Dimensions (inches)
- 4.25W X 1.25H X 5D
Power
- Supplied 24 Volt DC 2.6 A Adapter
Connectors
- To the Trilogy B2B
  - 1x RJ45
  - Provides 2 listen, 1 Speak and GPI
- To the power adapter
  - Captive 2.1 x 5.5mm DC Jac
- To the headsets
  - HJB-P-0200 (2X) 7 pin XLR F
- To the Foot Pedal
  - HJB-P-0200 (2X) 4 pin Lemo
Audio
- From Black Box 2
  - (2x) 0 dBu Balanced (RJ45)
- To Black Box 2
  - 0 dBu Balanced (RJ45)
- Headset Microphone
  - Electrec
- Headset Speakers
  - 2 Watt Headphone driver
Accessories
- HJB-B2R2
  - This cable provides the necessary breakout of the single CAT5 from the HJB-P-0200 to the three connectors required at the Mercury Interface Unit.
- HJB-G2R1
  - When two HJB-P-0200 units are connected to one Mercury Interface Unit this cable combines the two GPI connectors from the HJB-B2R2 cables to the single GPI connector on the MIU.
- PTT-0100 or PTT-200
  These units can provide headset extension and PTT switches for the HJB-P-0200

HJB-B2R1

HJB-B2R2